sks FS 4510, Руководство пользователя

Страница: 14 / 29

~ 14 ~
Assembly Instructions FS4510 (Continued)
Set the SKS-BUS call address on the intercom unit.
Each address is assigned to one bell button at the
door station. The addresses are listed n the appendix.
Normally, the SKS-BUS call address will set in with
“A1“.
When replacing intercom units set the DIP-Switch as
for the previously mounted intercom unit.
Loosen the keypad cover with a screwdriver.
Press the keypad cover again onto the intercom unit
until the clips snap into place.