sks FS 4510, Руководство пользователя

Страница: 16 / 29

~ 16 ~
5. Setting Up Internal Calling
5.1 Programming Internal Call Addresses
Internal calling makes it possible to call between two intercom units. Using the FS4510, you can
communicate with up to 2 intercom units. The light and special buttons on the FS4510 are provided for
this purpose. Press the corresponding button to place an internal call.
Note:
The function “Internal Call” is only possible with special models. If you need this function, let us know when
you place your order.
Intercom Unit Internal Call Button(s)
A
B
Programming Procedure for Internal Addresses:
Note:
Before the internal call addresses can be programmed, the house call address must be
programmed as described in 4.2.
Step Description
1 Set the internal call address (target address) on the DIP-Switch.
2 Push the talk button until you hear the signal tone.
3
Push the programming button and the desired internal call button (light or
special button) for the desired intercom unit. Push these buttons for around 5
seconds until you hear the second signal tone.
5.2 Deleting Internal Call Addresses
No individual internal call addresses can be deleted. When you delete, all internal call addresses stored
will always be deleted.
Push the programming button down and the corresponding internal call button within 2 seconds. Deletion
is completed when you hear a high-pitched tone lasting 3 seconds. Release the buttons. Now all call
addresses are deleted.