16
SKOPE CAREL ir33 Controller
Service Manual
SKOPE VF Series
Controller
Reset
To delete program modifications and reset the controller to SKOPE default
program, to change the cabinet operational mode (e.g. change use from
freezer to ice storage cabinet), or when a replacement controller is being
fitted, a ‘Controller Reset’ must be performed.
To reset the controller
1. Disconnect the freezer from the power supply.
2. Press and hold the
key while
plugging the freezer into the power
supply (this may require two people).
After a few seconds the controller is
reset and program mode ‘
bn0
’ is
displayed. The controller must never be
left in program mode ‘
bn0
’ as failure
will occur.
3. Press the
or
keys to select the
appropiate bn program (see page 17).
4. Immediately press the
key to
confirm the preferred program. If not
confirmed within 60 seconds the
freezer will remain in program mode
‘
bn0
’ (and cause failure). If this occurs,
repeat the above procedure.
