21
SKOPE OD1100N
Replacement Procedures
Service Manual
Cladding
The cabinet is clad with a metal kick panel, lit sign, front upstand, and painted metal sides. All
cladding is removable and replaceable.
Removing and
Refitting the
Cladding
When changing the cladding, you will need to remove the kick panel, lit sign, and side cladding
before fitting new cladding.
If you only need to remove a single cladding component, follow the steps until the specific
component has been removed, then reassemble in the order the components were removed.
Removing the cladding
Follow the procedures one after the other to remove the cladding:
1. Kick panel
(see page 19)
2. Lit sign (and sign sides for high sign model) (see page 20)
3. Left hand side/right hand side cladding (see page 22)
Replacing the cladding
Follow the procedures one after the other to replace the cladding:
1. Left hand side/right hand side cladding (see page 22)
2. Lit sign (and sign sides for high sign model) (see page 20)
3. Kick panel
(see page 19)
Lit sign
Upstand
Kick panel
Left hand metal side
Right hand metal side
IMPORTANT
Do not expose the cabinet to direct sunlight as this may
cause distortion of plastic parts.
