If an Apple device is connected as a Bluetooth
®
player at the same time as a
USB device the Bluetooth
®
- player will then be separated
» page 24
.
Disconnect USB device
›
Press the function key in the menu
Media
→
Remove USB safely
.
After disconnecting the USB audio source, playback will start from the last
played audio source. If this source is not available, the device switches to the
Radio
menu.
Loading USB device
With the ignition on after connecting the USB device, the charging process is
automatically started (applies for devices where charging via the USB connec-
tor is possible).
The charging efficiency can be different compared to the charging from the
usual mains power supply.
Some connected devices may not be recognised and cannot be charged.
The charging of the connected device is automatically stopped after switching
off the ignition.
CAUTION
■
USB extension cables or reducers may affect the operation of the connected
external device.
■
A video playback is not supported.
Note
When operating as well as connecting the external device, the respective op-
erating instructions are to be observed.
AUX - input
Read and observe and on page 23 first.
The AUX input is located above the storage box of the front centre con-
sole
» Fig. 15
on page 25
.
The AUX input can be an external device and can be connected via a connec-
tion cable from the ŠKODA original accessories.
A external device connected to the AUX input
cannot
be operated from this
unit.
Connecting AUX audio sources
The standard 3.5 mm stereo jack plug is used for the AUX input. If the external
devices do not have this jack plug, you must use an adapter.
After connecting the AUX audio source, the source must be manually selected
for playback from this source
» page 24
.
Disconnect AUX audio source
After disconnecting the auxiliary audio source is no automatic change to an-
other audio source takes place.
CAUTION
■
The AUX input must only be used for audio devices!
■
If an external device is connected to the AUX input, which is equipped with
an adapter for external power supply, the sound may be impaired. This de-
pends on the quality of the adapter which is used.
Note
■
The volume can be adjusted by setting the input sensitivity of the connected
AUX audio source
» page 13
,
Sound settings
.
■
The AUX input can be used for the enabled / disabled selection of the
source
» page 23
,
Media settings
.
26
Media