background image

 

12 

LIMITED WARRANTY

   

 

 

LIMITED  WARRANTY

   In  the  event  that  equipment  manufactured  by  SKIP-

LINE,  INC.  (hereinafter  referred  to  as  manufacturer)  fails  to  operate  properly  due  to  defect  in 
material  or  workmanship  within  a  period  of  180  days  from  the  date  of  the  original  purchase, 
said  equipment  will  be  repaired  at  manufacturer's  facilities  without  charge  for  parts  or 
labor.   Equipment  reasonably  deemed  by  the  buyer  to  be  unsatisfactory  must  be  returned, 
transportation costs prepaid, to manufacturer.  Manufacturer shall be the sole judge concerning 
the application and/or effect of this warranty, and this limited warranty shall only be effective to 
cover  repairs  performed  at  manufacturer's  facilities.   Warranted  repaired  equipment  will  be 
returned to buyer by surface freight.  Any premium freight requested will be paid by buyer. 
 

 

LIMITED  WARRANTY  CONDITIONS

  The above limited warranty shall not 

be  effective  or  actionable  if  the  equipment  has  been  tampered  with,  physically  abused, 
misapplied, or if any unauthorized repair has been attempted. 

 

 

DISCLAIMER  OF  WARRANTIES

   THIS  WARRANTY  IS  EXPRESSLY  IN 

LIEU OF ANY OTHER OBLIGATION ON THE PART OF MANUFACTURER INCLUDING ANY 
OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY  OR  FITNESS,  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE.   THERE 
ARE  NO  WARRANTIES  WHICH  EXTEND  BEYOND  THE  LIMITED  WARRANTY 
PREVIOUSLY SET FORTH, and no agent, employee or representative of the manufacturer has 
any  authority  to  bind  the  manufacturer  to  any  affirmation,  representation,  or  warranty 
concerning the express written consent from manufacturer. 

 

 

INCIDENTAL 

AND 

CONSEQUENTIAL 

DAMAGES 

EXCLUDED

   Manufacturer  will  not  be  responsible  for  any  incidental  and/or  consequential 

damages  arising  from  the  operation  of  the  manufacturer's  equipment.  The  incidental  damages 
for  which  manufacturer  will  not  be  responsible  include,  but  are  not  limited  to  the 
following:  inspection expenses, storage costs, transportation costs.  The consequential damages 
for  which  manufacturer  will  not  be  responsible  include,  but  are  not  limited  to  the 
following:   inability  to  meet  contract  or  other  deadline,  lost  time  and  other  employment 
expenses,  travel  expenses,  job  rework,  injury  to  persons  or  property,  attorney's  fees,  and 
litigation expenses. 

 

 

ABSOLUTE DISCLAIMER OF WARRANTY IN CERTAIN STATES

  Some 

states  may  not  allow  the  exclusion  of  limitation  of  incidental  or  consequential  damage,  so  that 
the above limitation or exclusion may not apply.  IN SUCH AN EVENT, THE ABOVE LIMITED 
WARRANTY  IS  NULL  AND  VOID  AND  THE  EQUIPMENT  IS  SOLD  AS  IS  WITHOUT  ANY 
WARRANTY  EITHER  EXPRESSED  OR  IMPLIED.   The  buyer  will  bear  the  entire  expense  of 
repairing  or  correcting  any  and  all  defects  that  presently  exist  or  that  may  occur  in  the 
equipment. 
 
 

Содержание MST-02













Отзывы: