- 3 -
3.0
WARNING
At service, inside cleaning, or if for some reason it is necessary to stay in the
mixer, the current must be disconnected at the main panel, and the switch must
be secured with a lock.
If emptying takes place directly from the outlet of the mixer or the emptying
auger to the floor or into open trolley, for safety reasons a pipe of minimum
length 850 mm must be mounted on the outlet.
The mixer may contain atmosphere with danger of explosion in the form of a
cloud of dust. Therefore equipment and electrical components placed in the mixer
must be Ex-marked for use in zone 21 according to unified standards DS/EN
50014, DS/EN 50281-1-1 and DS/EN 50281-1-2.
In order to observe the unified standards regarding dust explosions DS/EN 1127-
1 and DS/EN 13463-1 the mixer must be equipped with cover, and inspection-
and filling doors must be closed when the mixer is in operation or is filled from
mechanical feeding system.
The mixer may not – without prior contact to the producer – be used for other
purposes than described by the producer – which means mixing of feed stuffs
used in general such as ground grain, minerals, concentrate and liquids. For
further information see ”Field of application” and ”Technical specifications”.
The mixer must be erected on an even, concreted floor with a bearing capacity of
minimum 7 kg/cm².
Electrical connection must be carried out by an authorized electrician, and DS/EN
60079-14 and DS/EN 60204-1 must be observed.
