- 13 -
If you weigh into the mixer from auger, mill with cyclone or the like – and it is
the case of a closed system – you must use flexible connctions between the
transport system and the weighing system, figure 12 pos. 3.
Fig. 12
Connections to weighing system
Pos. 1
Suspension iron
Pos. 2
Cyclone/auger
Pos. 3
Flexible connection
Pos. 4
Mixer
Augers, cyclone etc. may not rest on the mixer.
Also use flexible connection to emptying auger, if any, figure 13 pos. 3.
Fig. 13
Connection to emptying system
Pos. 1
Mixer
Pos. 2
Emptying auger
Pos. 3
Flexible connection
Pos. 4
Transport auger
Pos. 5
Suspension iron
The transport auger may not rest on the weighing system.
