- 12 -
5.8
Mounting of Load Cells
The load cells are normally supplied on foot.
DO NOT
fasten the foot to the floor, as the load cells must be able to centre
themselves during loading.
If the load cells are fixed, faulty load may occur causing faulty weighing.
Mount a swivel pin with conical nut on each load cell.
Place the steering hole of the mixer foot over the conical nut as shown in figure
11.
Fig. 11
Mounting of load cell
1
2
3
4
Pos. 1
Mixer foot
Pos. 2
Steering pin
Pos. 3
Cone
Pos. 4
Load cell on foot
It is important that the weighing system is standing totally free without
unintended load on the load cells.
