SKIMO – AIR CONDITIONING UNIT
CODE PRODUIT : 320B12 / 320B17
INSTALLATION, USER AND MAINTENANCE MANUAL
Page 3/22
1. INTRODUCTION
The unit described in this manual, called unit, Skimo unit, A/C unit, Skimo A/C unit or Skimo, is designed to be installed
on the roof of agricultural, construction works, road works, or industrial vehicles, machines or vans. The Skimo unit air-
conditions the cabin of the machine or vehicle. The Skimo A/C unit is a monobloc unit pre-charged with R134a refrigerant
gas and containing all the parts of the A/C circuit. It only needs to be connected electrically to the machine or vehicle.
(See electrical requirements)
.
2. SAFETY INSTRUCTIONS AND WARNINGS
You must read and understand this manual before proceeding to the installation, set-up, use and maintenance of
the Skimo A/C unit.
List of pictograms used in this manual or on the Skimo unit:
Pictogram
Meaning
Pictogram
Meaning
Conform to CE standard
General danger
Read and understand the manual
Physical danger
Important information
The Skimo A/C unit must be installed by a person qualified and adequately equipped. All alteration of the unit or
incorrect installation are strictly forbidden and can be dangerous. SNDC SAS cannot be held responsible in the case of
physical or material damages due to an alteration, installation or use that is different to that described in this manual.
The Skimo A/C unit weights approximately 30 kg. Take necessary precautions when handling, installing and using
the unit to avoid any risk of injury, fall or damage. Do not handle or install the Skimo unit on your own.
Do not store, install or use the Skimo A/C unit close by flammable liquids, gas or solids, or close by a heat source
or in a place presenting risks of explosion or fire.
If the Skimo A/C unit is damaged, it must not be used or turned on. It must be repaired or replaced first.
If repairs or maintenance operations are required on the Skimo A/C unit, use a qualified company using qualified
personnel to perform the operations. Any repair or maintenance operation that is not done properly can create risks of
danger. Do not try to repair the Skimo unit by your own means if you are not qualified. For the charge or maintenance of
the A/C refrigerant circuit, use a qualified company that is equipped with appropriate tools and security equipment and
that uses original spare parts.
This monobloc Skimo unit must not be used for vehicles or machines that work with inclinations steeper than 25°
for the pitch angle and 45° for the roll angle. Do not use on vehicles or machines that go faster than 110km/h. Do dot
alter cabins that are certified « FOPS-ROPS »
In case of fire, do not open the unit cover. Extinguish the fire with an appropriate fire extinguisher for electrical
and A/C units.
Contact the vehicle or machine supplier to enquire of the necessary changes regarding the papers (height of
vehicle, weight…). Perform any necessary changes.
Always turn the Skimo unit and the vehicle or machine off before an operation of maintenance on the Skimo.
Disconnect all the electrical connections of the Skimo unit to the machine before fixing, or repairing the Skimo unit
or before any operation that could involve getting in contact with the electrical circuit.
Do not introduce foreign objects inside the Skimo A/C unit.
