SKILTEC Luxaflex Duette PowerView 9F-2, Информационное руководство

Страница: 19 / 25

ISSUE DATE: NOVEMBER 2017 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: APPROVED BY: D.ALTIPARMAKOVA PAGE 19
PRODUCT INFORMATION MANUAL
SECTION: 9F-2 DUETTE
®
POWERVIEW
®
MOTORISATION
Top-Down/Bottom-Up and Duolite
™
Operation
1. Press
▼
CLOSE to lower the bottom rail, closing the shade.
2. Press the left arrow to lower the middle rail. This opens the shade top-down on a Top-
Down/Bottom-Up shade or covers the window with the top fabric panel on a Duolite
™
shade.
(If the bottom rail is not fully lowered, pressing this button will lower the bottom rail first then
lower the middle rail.)
3. Press the right arrow to raise the middle rail. This closes the shade bottom-up on a
Top-Down/Bottom-Up shade or covers the window with the bottom fabric panel on a
Duolite shade.
4. Press
▲
OPEN to raise the bottom rail, opening the shade bottom-up. (If the middle rail is
not fully raised, pressing this button will raise the middle rail first then raise the bottom rail.)
5. Press
■
STOP to stop shade movement anywhere along the shade’s travel.
Further Operation and Programming Information
PowerView
®
Pebble
®
Remote and/or PowerView Surface Remote Operation
For information regarding operation and programming of the PowerView remote, refer to your
PowerView Motorization Remote Control Guide .
PowerView Scene Controller
For information regarding operation and programming of the PowerView Scene Controller, refer
to your
PowerView Motorization Scene Controller Guide .
PowerView App Operation
PowerView Hub is required for PowerView App operation. For information regarding setup
and operation using the PowerView App, refer to the online
PowerView App Software Guide at
hunterdouglas.com/powerview/support
.