manualshive.com logo in svg

SKF CAHB-20 Series, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
SKF CAHB-20 Series Скачать руководство пользователя страница 19

4.3 Special features

Mechanical overload protection

The actuator contains a mechanical overload protection unit (clutch).

This overload protection unit will activate if the linear unit of the 

actuator overloads. This activation will avoid to push or pull over the 

maximum force defined on the datasheet and will protect the motor 

and gear unit from being damaged.

 



CAUTION

Continued operation of the clutch can result in overheating and 

damage to the linear actuator. If clutch activates, switch off 

power immediately.

 



CAUTION

To prevent damage from overheating when the actuator stop 

with a high motor temperature, do not restart the actuator but 

wait until the temperature decreases.

Gore automotive vent

The vent allows the equalization of the pressure inside the actuator 

when it is operated, that will insure an optimum usage of the sealing 

system

Thermal protection

The thermal switch built-in the motor will switch off the power of the 

motor in case of over heat of the motor. It will automatically reset 

when the temperature decreases.

Overload or more frequent operating the actuator over the max 

duty cycles defined on the data sheet would lead to motor 

overheating.

Fig  9

0°

03°

06°

09°

120°

150°

0°

03°

06°

09°

120°

150°

19

Содержание CAHB-20 Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды