C AUTION
Hose lines must be installed and
maintained by persons familiar with
instructions to ensure operational safety
of PS pump.
Failure to comply may result in personal
injury or damage to component.
NOTE
Follow vehicle manufacturer installation
instructions regarding all drilling and
welding procedures (i.e. specified
minimum distances between holes and
upper/lower rim of frame or between
two holes).
NOTE
Route supply lines professionally. Firmly
bolt together any components subject to
pressure.
C AUTION
Always use supply line hose and fittings
appropriate for programmed/set system
pressure.
Failure to comply may result in
personal injury or damage to system
components.
Installation
• Any safety equipment already installed
on vehicle:
–
should not be modified or made
ineffective
–
should only be removed for purpose
of installing system
–
must be replaced after removal
• Use only original Lincoln spare parts or
parts approved by Lincoln.
Installation and maintenance
of hydraulic hoses
Lubrication hose lines:
• Do not subject to torsion.
• Do not install twisted.
• Do not allow lines to rub against metal
components or edges.
• Always perform regular visual checks and
replace if worn and/or damaged
(at the latest years after installation).
Pay attention to non–linear installations to
allow for larger bending radius as possible.
Avoid kinks. In constricted installation
conditions, use pipe elbow unions to avoid
danger of kinking behind hose socket.
Use high pressure hydraulic hose for
lubrication lines.