Skeeter FRESHWATER Скачать руководство пользователя страница 94

Страница: 94 / 94

W-2

Table Of Contents

www.SkeeterBoats.com

This warranty shall apply in accordance with the law of the State of Texas. EXCEPT AS EXPRESSLY

STATED ABOVE NO WARRANTY IS GIVEN WHETHER EXPRESS OR IMPLIED. NO IMPLIED

WARRANTY OF MERCHANTABILITY OF FITNESS FOR ANY PARTICULAR PURPOSES IS

GIVEN. IF ANY IMPLIED WARRANTY IS DETERMINED TO EXIST, IT SHALL APPLY ONLY FOR 6

MONTHS AFTER THE DATE OF DELIVERY TO THE FIRST PURCHASER FROM THE DEALER.

SKEETER PRODUCTS SHALL NOT IN ANY MANNER BE LIABLE FOR ANY CONSEQUENTIAL,

INCIDENTAL OR SPECIAL DAMAGE RESULTING FROM ANY DEFECTS IN ITS BOATS OR FROM

A BREACH OF THIS WRITTEN LIMITED WARRANTY, INCLUDING ANY IMPLIED WARRANTIES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or

limitations of incidental or consequential damages. So the above limitations or exclusions may not

apply to you. This warranty gives you specific legal rights, and you may also have other rights, which

vary from state to state.

This is Your

WARRANTY STATEMENT

Please Retain For Your Records

DATE OF PURCHASE: ____________________________________________________________

SKEETER supports our country’s vast fisheries by promoting “catch and release,” and is committed

to preserving the environment in our manufacturing practices.

At SKEETER, we continually strive to improbe and enhance specifications without notice. Please

confirm with your SKEETER dealer prior to purchase. Specifications and measurements are

approximations and subject to variances. Some boats shown with optional equipment.

Follow all instructional materials and local and federal laws. Always wear recommended protective

apparel. Operate within your capabilities, allowing extra time and distance for maneuvering. Always

operate in a responsible manner, respecting the environment and others around you. Don’t drink

alcohol or use drugs and then operate your boat.

Boat smart from the start. Take a boating safety course and get a free vessel safety check annually

for your boat. For more information, contact the United States Coast Guard Auxiliary at 800-368-5647

or www.cgaux.org, or the United States Power Squadrons at 888-FOR-USPS or www.usps.org.

Skeeter Products, Inc.

One Skeeter Road

Kilgore, TX 75662

Содержание FRESHWATER































































































Результаты поиска

Содержание FRESHWATER

Отзывы:

Похожие инструкции для FRESHWATER

Бренды по названию

Популярные бренды

Skeeter FRESHWATER, Руководство пользователя

Результаты поиска

Содержание FRESHWATER

Отзывы:

Похожие инструкции для FRESHWATER

Бренды по названию

Популярные бренды