manualshive.com logo in svg

Skeeter FRESHWATER, Руководство пользователя

Поделиться
Скачать
Skeeter FRESHWATER Скачать руководство пользователя страница 36

3-15

Table Of Contents

www.SkeeterBoats.com

BASS BOATS

Battery Charging System – If Equipped

The battery charging system allows you to charge the batteries without removing the batteries from 

the boat. See the manufacturer’s literature for operating instructions.

Make sure all accessories and outboards are in the OFF position when connecting to the power 

source and charging the batteries.

Livewell Systems

Your Skeeter boat is equipped with a livewell system that is designed to keep your fish alive and 

healthy. See LIVEWELL OPERATION – 3-WAY VALVE SYSTEM on page 3-33 for more information.

After each use, rinse the livewell and baitwell (if equipped) with clean fresh water, remove any debris 

from the pick-up and drain screens, and allow the livewell to air-dry after each use. The pick-up 

screens are located at the bottom of the transom and the drain screens are located in the livewell or 

baitwell.

WARNING

Do not charge your batteries in the boat unless your boat is equipped with an onboard 

charging system.

Содержание FRESHWATER































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды