Skeeter FRESHWATER Скачать руководство пользователя страница 33

Страница: 33 / 94

3-12

Table Of Contents

www.SkeeterBoats.com

BASS BOATS

FX Models

FX boats are equipped with two switch panels to control all boat functions. Switches are equipped

with indicator lights for operation.

Helm Panel

Power: The power button controls the power ON/OFF to all

accessories. All buttons and gauges are inactive if the power

is off.

Horn: The HORN button controls the horn. Press and hold to

sound the horn.

Lights: The LIGHTS button controls the navigation and

anchor lights ON/OFF. Press the button once to activate

both the navigation and anchor lights. Press the button again

(twice) to activate only the anchor lights. Press the button a

third time to turn off both lights.

Courtesy Lights: The CTSY LIGHTS button controls power

ON/OFF to the courtesy lights located throughout the boat.

Press the button once to turn on the courtesy lights; press the

button again to turn them off.

Bilge: The BILGE button controls power ON/OFF to the

bilge pumps. Pressing the button once activates the PORT

bilge pump. Pressing the button a second time activates the

STBD bilge pump. Pressing the button a third time turns off

the PORT bilge pump and the STBD bilge pump continues to

run. Pressing the button a fourth time turns off all bilge pumps.

The indicator lights for each bilge pump will light up when the

automatic float switch activates that pump.

Port / Starboard Fill: The PORT and STBD FILL buttons

control power ON/OFF to the corresponding livewell fill water

pumps. Pressing the button once turns the pump to a constant

on. Pressing the button a second time turns the pump to an automatic mode; this allows the aerator

timer button to control the livewell fill pump. Pressing the button a third time turns off the livewell fill

pump.

Port / Starboard Recirculation: The PORT and STBD RECIRC buttons control power ON/OFF to

the corresponding livewell recirculation water pumps. Pressing the button once turns the pump to a

constant on. Pressing the button a second time turns the pumps to an automatic mode; this allows the

aerator timer button to control the livewell recirculation pump. Pressing the button a third time turns off

the livewell recirculation pump.

Aerator Timer: AER TIMER is activated when the power button is ON and the FILL / RECIRC

buttons are set appropriately. The timer will start on low (1 minute on and 7 minutes off). Press the

button once and the timer will be on medium (1 minute on and 3 minutes off); press the button again

and the timer will be on high (1 minute on and 1 minute off).

FX Switch Panel

Figure 3-10

Содержание FRESHWATER































































































Результаты поиска

Содержание FRESHWATER

Отзывы:

Бренды по названию

Популярные бренды

Skeeter FRESHWATER, Руководство пользователя

Результаты поиска

Содержание FRESHWATER

Отзывы:

Бренды по названию

Популярные бренды