2
(C) Copyright 2010-2014 SKD System AB
Remote power control
Remote control of power switch. Power switch can also be controlled by local sensors.
Safety Precautions
The product must be connected to earthed AC outlet.
Do not use damaged AC connecting cables.
The product may get damaged by AC currents exceding power rating of the product.
Do not expose the product for excessive cold or heat.
Do not spill liquids onto the product.
The product may not work properly after fall to the floor or after other types of mechanical distress.
Installation
Mounting
Mount Rhone2 into cabinet, backside of desk, underneath desk, wall or other appropriate place.
Use velcro closing, alternatively metal fixtures.
Velcro closing is included in delivery.
Connect power
cables
Connect product to the mains with cable that has Wieland mini, GST15i3, female connector on the product end.
Connect product to equipment with cables that have Wieland mini, GST15i3, male connectors on the product side.
Note: Connecting Wieland cables need to be handled by trained service personnel.
E-meter
Not action needed. E-meter starts measuring current and power automatically when power to Rhone2 is turned on.
