Resetting Pump to Manufacturer
Default Settings
1. Press the security code
and then press the
CAL button. The pump serial number will display
briefly.
2. Press
repeatedly to scroll through until the LED
displays dEFt.
3. Press [
]. The word No will appear on the display.
To reset to factory default settings:
Press
.
Yes will appear on the display. Press [
].
To retain existing settings:
Press
to scroll
to No and press [
].
The number 30 will appear briefly, then the display will
return to run time presets.
Digital display:
Yes, reset to pump default
Digital display:
Pump default
Digital display:
No, do not reset to pump
default
Enabling/Disabling Alarm and Fault Features
1. Press the security code
to enter setup mode.
2. Press CAL. The pump serial number will display briefly.
3. Press
or
to turn feature on or off
(see below)
. Press
to advance to
next feature.
4. Press [
] to exit feature setup. Press [
] again to return to run time
presets.
Feature
ON
OFF
Button Beeper: On/Off
Alarm Beeper: On/Off
Flow Fault: On/Off
Flow Fault Restart: On/Off
Digital display:
Button beep on
Digital display:
Button beep off
Digital display:
Alarm beep on
Digital display:
Alarm beep off
Digital display:
Flow fault on
Digital display:
Flow fault off
Digital display:
Flow restart on
Digital display:
Flow restart off
