Programming Your Own Run Time Presets
1. Press
.
2. Pt: 1 will alternately display with T xx. This
corresponds to the first stored preset time.
3. Press
to scroll to the number of minutes (1 to 999).
Press
to scroll to Cont, Intt, or End mode options.
End will not appear as an option during setup of first
preset.
4. When the LED displays the desired time or mode,
press
to move to the next preset time.
5. Repeat Steps 3 and 4 for each preset up to eight
presets. The sequence will repeat from one to eight.
6. When finished, press [
]. Stor will display on the
LED.
To save new settings:
Press [
]. The pump
will return to normal pump operation.
To ignore new settings:
Press
. The pump will
return to normal pump operation.
Note:
While programming presets, scrolling below Intt will display End after
the first preset is selected. Choosing End will truncate the stored preset sequence
(see below)
. For example, if the user desires to store only two presets, preset time
3 can be set to End, shortening the number of presets to scroll through. Times
programmed for preset times Pt: 4 through 8 will not display until the presets
are changed to make them display or the factory defaults are reset (
see Resetting
Pump to Manufacturer Default Settings
).
Manufacturer Default Presets
The pump returns to the beginning preset
at the first End it encounters. This allows
the user to shorten the number of presets
to be scrolled through.
Preset 1 cannot
be set to End.
Presets Sequence
5
Digital display:
Store settings
Digital display:
First preset
Digital Display:
Time set for preset 1
Preset 8
End
Preset 7
Intt
Preset 6
Cont
Preset 5
t 15
Preset 4
t 10
Preset 3
t 5
Preset 2
t 2
Preset 1
t 1
Preset 8
End
Preset 7
Intt
Preset 6
Cont
Preset 5
t1 - 999
Preset 4
end
Preset 3
t1 - 999
Preset 2
t1 - 999
Preset 1
t1 - 999
