IndustrialPro™ and MobilityPro™ Gateway
User's Guide
Copyright © 2010 Sixnet LLC. All rights reserved.
67
1.11
– November 2, 2011
1)
Open
HyperTerminal
. To do so, click the
Start
button and then click on
Run
. In the Run
window, enter
hypertrm
and click OK.
2)
On the
Connection Description screen
, enter
any name
, select any icon, and then click
OK.
3)
On the
Connect To screen
, change the
Connect using
value to the
COM port
the modem
is connected to and click OK.
4)
On the
COM Properties screen
, change the
Bits per second
value to
115200
. Leave all
the other options untouched (8, None, 1, Hardware), and click OK.
You should now be able to send AT commands. You will not see what you type until you send the command ATE1 or
enable echo in HyperTerminal's settings, but the commands will still be sent to the modem. Send ATI1 and confirm that
you see the words “BlueTree Wireless” in the response.
