sitrex TR/6-S, Сборка, использование и обслуживание

Страница: 6 / 48

6
2) GENERAL SUMMARY OF SAFETY AND ACCIDENT
PREVENTION INSTRUCTIONS.
Read all the instructions and rules carefully before using the machine. If you
have any doubts, contact the dealer, the distributor or the manufacturer. The
manufacturer disclaims all liability for non-compliance with the safety and
accident prevention instructions and rules.
1) Pay attention to the danger signs and symbols on the machine and in the manual.
2) Do not touch moving parts.
3) All work on the machine (including adjustments) must always be done with the
tractor stopped, the brake on and the engine turned off.
4) It is strictly prohibited to carry persons and/or objects on the machine and/or on the
tractor.
5) It is strictly prohibited for persons without a license, without the necessary
experience or who are not physically fit to drive the tractor with the machine
connected.
6) All safety and accident prevention measures prescribed in this manual must be
strictly observed.
7) Always evaluate whether the tractor to be used is suitable for the purpose, given
that even if the machine is the trailed type, it alters the tractor’s stability; therefore,
take all the necessary precautions for working in safety (take into consideration the
type of terrain, tire pressure, etc.).
8) Check that all safety devices for transport and working are in good condition and
functioning before operating the machine.
9) When driving on public roads, always observe the traffic rules and regulations of
the country where you are working.
10) Familiarize yourself with all the controls and the use of the machine before
starting to work.
11) Wear suitable clothing while using the machine. Do not wear clothing that is
loose or that could get caught in the moving parts.
12) Never leave the driver’s seat while the tractor is moving.
13) Always bear in mind that the road holding, steering and braking of the tractor are
significantly affected by the machine being trailed.
14) Turn off the engine, apply the brake and remove the key from the ignition before
attaching/detaching the machine to/from the tractor.
15) Replacement parts must meet the requirements defined by the manufacturer. Use
only original replacement parts.
16) The safety stickers must always be in good condition and clearly visible. They
should be kept clean and must be replaced if they become illegible (if necessary they
can be ordered like any other replacement part).
Note: this machine is not approved for transport on public roads, therefore
anyone who wishes to do so must have the machine approved according to the
local regulations in force.