sitrex TR/6-S, Сборка, использование и обслуживание

Страница: 17 / 48

17
6) DANGER
Attach the bushings 1 to the proper seats. Now attach drawbar 2 to support A using pin 3, washer
4 and nuts 5. Attach the stand 6 to seat B on drawbar 2 using the pin 7 and clip 8. Assemble the
hose support 9 with the screw 10 and nut 11.
Attach the tractor hitch 12 to the hole B on drawbar 2 using screw 16, washers 17-18 and nut 19.
NOTE: The optional hitch 20 is installed following the same procedure as that for the standard
hitch 12.
In this step, you will use:
Item 1: 2 bushings ø35-39x30 (1.38”-1.54“x1.18”)
Item 3: 1 pin ø35x184 (1.38”x7.24”)
Item 4: 1 washer ø23-50x4 (0.91”-1.97”x0.16”)
Item 5: 1 nut M22 (0.87”)
Item 7: 1 pin ø15x78 (ø0.59x3.07”)
Item 8: 1 clip ø3 (ø0.12”)
Item 10: 1 bolt M12x25 (0.47”x1”)
Item 11: 1washer ø12-40x4 (0.47-1.57x0.16”)
Item 13: 1 bolt M20x140 (0.78”x5.51”)
Item 14: 1 spring washer ø21 (0.83”)
Item 15: 1 nut M20 (0.78”)
Item 16: 1 bolt M12x140 (0.47x5.51”)
Item 17: 2 washers ø12-36x2.5 (0.47-1.42x0.1”)
Item 18: 1 spring washer ø13 (0.94”)
Item 19: 1 nut M12 (0.47”)