sitrex TR/6-S, Сборка, использование и обслуживание

Страница: 19 / 48

19
8) DANGER
(see drawing on preceding page)
Attach the cylinder 1 at seat A on the section and seat B on lever. Fasten them to seats A-B
with pins 2, washers 3 and nuts 4. Attach the cylinder 1 at seat C on the arm and seat D on
wheel support. Fasten them to seat D with pins 2, washers 3 and nuts 4 and to seat C with
pins 5, washers 3 and nuts 4.
In this step, you will use:
Item 2: 3 pins ø25x58 (ø1”x2.28”)
Item 3: 4 washers ø23-50x4 (ø0.91”-1.97”x0.16”)
Item 4: 4 nuts M22 (0.87”)
Item 5: 1 pin ø25x116 (ø1”x4.57”)
9)
You have now reached this stage of the assembly. The machine rests on its wheels and
thus has good stability. However, continue to use great caution during the rest of the
assembly, so as to work safely. In order to work better, spread apart the right and left
sections of the machine.