sitrex QRX 12, Сборка, использование и обслуживание

Страница: 44 / 54

42
To put the machine in the transport position (Fig. 5.7) carry out the operations in the following order starting
from the working position (Fig.5.9):
1) Make sure that the rake wheels are completely still.
2) Activate the tractor hydraulic control and raise the arms until they reach the stops (Fig. 5.7).
3) Fully retract the telescopic arms (A) (Fig. 5.2) by activating the tractor valve after selecting the “EX-
TENSION” position on the remote control in Fig. 5.3.
4) Adjust the angle of the arms (C) (Fig. 5.2) so they are parallel to the ground by activating the tractor
valve after selecting the “ANGULATION” position on the remote control in Fig. 5.3.
5) Close the cylinder valves in Fig. 5.8 by turning the levers A for the right and left cylinders, levers B
for the right and left cylinders, and lever C (optional)
6) Check that all safety signs and reflectors are installed, clean and visible.
Danger of crushing.
Keep a safe distance away from the machine when the sections are being raised or lowered.
When the valve is in the “OPEN” position, the lever is parallel to the axis of the
threaded fittings
When the valve is in the “CLOSED” position, the lever is perpendicular to the
axis of the threaded fittings
B
A
C
5.8
DANGER !!!