sitrex QRX 12, Сборка, использование и обслуживание

Страница: 40 / 54

38
If the hydraulic movements on the
right and left sides of the machine
get slightly out of sync with each
other, do a complete cycle of open-
ing and closing over the entire stroke
of the cylinders in question to re-
store the symmetry of the move-
ments.
5.3 ELECTRIC SELECTOR
The hydraulic cylinders (B) and (D) in Fig. 5.2 make it possible to rapidly adjust the working width and wind-
row width from the tractor valve using the electric selector in Fig. 5.3 (angulation - extension).
To change the extension of the telescoping arm (A), move the tractor valve connected to the line of hoses of
cylinders (B), after having selected the “EXTENSION” position on the remote control shown in Fig. 5.3.
To change the angle of the arm (C) move the tractor valve connected to the line of hoses of cylinders (D),
after having selected the “ANGULATION” position of the remote control in Fig. 5.3.
Changing the working angle results in the changing of the windrow width.
5.2
5.3
B
D
A
C