sitrex BR 2030/6, Руководство по сборке

Страница: 56 / 62

52
4.2 BASKET SPEED ADJUSTMENT
WARNING
Unexpected machine movement!
The machine could move automatically during calibration. Park on a flat surface, engage
the parking brake, and be sure that the area around the machine is clear before starting the
calibration process.
Failure to comply could result in death or serious injury.
Adjusting the rpm above 90 RPM will cause damage to the basket rake bars (a photo tachometer is
required to properly adjust the basket rake speed).
Tractor must have a minimum of 34 l/min (9 US gpm) to a maximum of 75.7 l/min (20 US gpm) of hydraulic
flow.
1. Apply a piece of reflective tape on the basket reel ( Fig.4.2.1 ).
2. Start the tractor and set the park brake.
3. Make sure the speed dial is fully turned counter-clockwise (
Fig.4.2.2 ).
4. Engage the emergency stop switch by pushing the knob down, now the
“TX ” light in the center of the
controller will start to blink ( Fig.4.2.2 ).
5. Engage the selective hydraulic control valves on the tractor.
6. Press and hold the
“RAKE ON/OFF” button for
3 s , until the light over the button comes on ( Fig.4.2.3 ).
4.2.1 4.2.2
EMERGENCY STOP
TX
LIGHT
RAKE
ON/OFF
LIGHT
4.2.3
SPEED DIAL