![SiTime SiT6502EB Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/sitime/sit6502eb/sit6502eb_user-manual_1285801012.webp)
SiT6502EB HW UM Preliminary Rev 1.0
Page 12 of 33
SiT6502EB Evaluation Board (EVB) HW User Manual
-
Default VDD Supply on the EVB is configured to 1.8V and default VDDIN supply on the EVB is
configured to 3.3V
-
The FTDI chip on the EVB is configured to I
2
C as the default communication protocol
-
EVB default configuration is shown in
Figure 8. SiT6502EB Starter Connection Diagram
The general guidelines for single USB power supply operation are listed below:
-
Use either a USB 3.0 or USB 2.0 port. These ports are specified to supply 900 mA and 500 mA
respectively at +5V
-
If you are working with a USB 2.0 port and you are current limited, turn off enough DUT output
voltage regulators to drop the total DUT current ≤ 470 mA.
Note:
USB 2.0 ports may supply > 500 mA. Provided the n5V drops gracefully by less
than 10%, the EVB will still work