Document NO.:RD-522-39-001 2018.06.04 Version: A
- 5 -
·
Fit the alarm on the bracket and turn the alarm body
clockwise, until matching well on the bracket.
Installation:
·
Take off the bracket from the alarm body.
·
Press the bracket on the installation position, mark
installation hole of the bracket with pencil.
·
Bore two installation holes on the sign with electric drill.
Make diameter of holes is 5mm, Strike the two plastic
plugs into holes with hammer.
·
Attach the bracket to the plastic plugs and fix tightly the
screws into the plastic plugs. (Refer to Diagram 4).
·
Press the button for test the unit. The alarm sounds 3
beeps – 1.5 seconds pause, repeat it until release the
button, if no sound, it indicates a defective alarm, you
can refer to ”Trouble shooting” for solution or return to
your retailer during warranty.
·
If you have any questions on installation, you can contact
your retailer.
WARNING:
To prevent injury, this unit must be securely attached to the
ceiling in accordance with the installation instructions.
Manufacturer:
Siterwell Electronics CO., Limited
ADDRESS:
No.666 Qingfeng Road,Jiangbei
District,Ningbo,Zhejiang Province,China
TEL: 0086-574-87729581
FAX: 0086-574-87729581
E-MAIL:[email protected]
Diagram 4
I
nstallation sketch map:
