Appendix A:
Network Camera - Specifications
Model
Network Camera
Dimensions
90mm (W) * 35mm (H) * 90mm (D)
Operating
Temperature
0
°
C to 40
°
C
Storage
Temperature
0
°
C to 40
°
C
Network Protocols:
TCP/IP, DHCP, SMTP, NTP, HTTP, FTP, NTP, RTP, RTSP, UPnP
(Discovery only)
Network Interface:
1 Ethernet 10/100BaseT (RJ45) LAN connection
Wireless interface
IEEE 802.11b/802.11g compatible, Infrastructure/Ad-hoc mode,
WEP/WPA Personal/WPA2 Personal security support, roaming
support
LEDs
3
Power Adapter
5V DC External
Lens
F2.8mm @F2.8 Fixed Focus lens (cell phone size) in socket type
Regulatory Approvals
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate this
equipment. (Example - use only shielded interface cables when connecting to computer or
peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.