Basic Settings - Wireless (WL-404 only)
This screen is displayed when the
Wireless
menu option is clicked.
Wireless Network
Network Type
This determines the type of wireless communication used by the
Network Camera.
•
If you have an Access Point, select
Infrastructure
.
•
Otherwise, select
Ad-hoc
.
SSID
This must match the value used by other devices on your wireless
LAN.
Note! The SSID is case sensitive.
Domain
Select your region from the drop-down list.
Channel No.
•
In
Infrastructure
mode, this setting is ignored. The Network
Camera will use the Channel set on the Access Point.
•
For
Ad-ho
c mode, select the Channel you wish to use on your
Network Camera. Other Wireless stations should use the same
setting.
•
If you experience interference (shown by lost connections and/or
slow data transfers) you may need to experiment with different
channels to see which one is the best.
Security
Security
System
Select the desired option, and then enter the settings for the
selected method:
•
Disabled
- No security is used. Anyone using the correct SSID
can connect to your network.
•
WEP
- The 802.11b standard. Data is encrypted before
transmission, but the encryption system is not very strong.
•
WPA/WPA2 Personal
- Like WEP, data is encrypted before
transmission. WPA is more secure than WEP, and should be used
if possible. WPA Personal is the version of WPA which does NOT
require a Radius Server on your LAN.
WEP
Authentication
Type
Normally this can be left at the default value of "Automatic." If that
fails, select the appropriate value - "Open System" or "Shared Key."