35
second 13 liters, deciliters or centiliters of “fertilizer 2”
per each 8 m
3
of water. At “Parameters - Flows” the
units these proportions will be used with are identified.
The irrigation units of the ratio are in time or vol-
ume, always depending on the irrigation units config-
ured in “Parameters - Flows” [6.5.]. The irrigation units
can be modified with the “T/V” key for each program.
This way, combinations may be used, for example
irrigation for 2 hours and injection 3 liters of fertilizer
per 10 m
3
of irrigation.
I=02:00 F1 10/03 F2 08/13
In this way of operation a total value of fertilizer to
be applied is not given but it is continuously relates to
the irrigation quantity programmed.
To move to another pro-
gram the cursor has to be
placed at the program num-
ber (P01) and enter the new
one by using the up arrow
key to increase and the down
one to decrease.
In order to accede to a
sub-program the cursor has
to be placed at the (P01-
00
)
value and enter the new one. Another possibility is by
using the arrows from here or from the different values
of the sub-program; use the up arrow to increase and
the down one to decrease.
The right-left arrow keys are used to move the
cursor between the different values.
To exit any programs screen, press the “Func-
tion” or “View” keys.
8. READINGS
The READINGS function will be used whenever
we want to consult statistical data. To do so, press the
“Function” key, choose the function by its number (2)
and then press “Enter”.
Programs : 1
Readings : 2
Erasure
:
3
Parameters: 4
Manual : 5
Clock : 6
The “Readings” menu is the following:
READINGS
Totals :1
Anomalies :2
New anom. :3 History :4
Sensors :5
READINGS
Communica. :6 Versions :7
In order to exit any reading screen press the
“Function” or “View” keys.
8.1. TOTAL READINGS
At the “
Totals
” the water and fertilizers units ap-
plied by time and volume are shown, in general and in
each sector.
The first screen of “
General totals
” informs of the
date and time when the last erasure of totals was car-
ried out, the time and total volume of irrigation and the
time or total volume of each fertilizer.
General totals 15/09/14
17:47.11
Irrig.=
0000:00.00
000000.000 m
3
General totals
F1 000000.00 L
F2 000000.00 L F3 000000.00 L F4 000000.00 L
General totals
F5 0000:00.00
F6 0000:00.00 F7 0000:00.00 F8 0000:00.00
All the other totals screens correspond to the val-
ues of the
99 sectors
which can be found in the
Agrónic 4000.
Sector totals 01
000.00 m
3
/h
Irrig.=
0000:00.00
000000.000 m
3
Sector totals 01
F1 000000.00 L
F2 000000.00 L F3 000000.00 L F4 000000.00 L
Sector totals 01
F5 0000:00.00
F6 0000:00.00 F7 0000:00.00 F8 0000:00.00
In the irrigation units, the time format is hours,
minutes and seconds, and the volume is cubic meters
with three decimals. In fertilizer there is only one for-
mat depending on the time or volume units assigned
to the fertilization at “flow parameters” [6.5.]. If the
irrigation units of a program are different, they will not
be added. That is why it is very important to take into
account that in order to do a correct addition of the
applied fertilizers, it is necessary to work with the
same units both at “Parameters – Flows” and at “Pro-
grams”.
The totals by volume of the sectors that are irri-
gating at the same time with the same meter, it will be
done distributing the value of each pulse of the meter,
depending on the expected flow in each sector. This
detail is configured at the “Parameters - Sectors” sec-
tion [6.6.]. Look at the example below:
Sector 1, expected flow = 23.6 m
3
/h
Sector 2, expected flow = 18.9 m
3
/h
A pulse of the 1000 liters volumetric meters ar-
rives, at the totals 555.294 liters will be distributed
to sector 1 and 444.706 liters to sector 2.
