32
7. PROGRAMS
To accede to the irrigation programming press
the “Function” key, choose number 1 and then press
"Enter".
Programs : 1
Readings : 2
Erasure : 3
Parameters: 4
Manual : 5
Clock : 6
Look at an example of a program resume:
The Agrónic 4000 has
35
independent
programs
with
12 sub-programs
or irrigation sequences at each
of them.
The number next to the P, at the left of the upper
line of the screen, indicates the number of program.
The number of the sub-program is indicated after a
hyphen.
When 00 is set at the sub-program number it will
correspond to the program starting conditions (P01-
00).
The value P01-01 would be the first sub-program
to enter when the irrigation program started and the
P01-12 would be the last one. In necessary programs
can
be
enchained
forming
sequences
of
24,
36,
48,
etc.
Inside the sub-programs there can be some
empty ones or irrigation units without value. They will
be automatically passed over when dealing with the
irrigation sequence.
Example of an irrigation program:
P01-00 SMTWTFS
Start= 15:10
Pre/Pos= 010/030 F=+04% 00/00 - 00/00
P01-01 S33 05 .. .. .. .. .. .. .. ..
I=02:17 F1 0023 F2 0108 L
The values of a program are the next:
On the first screen at the upper line there is the
program
number and the
sub-program P01-00
number.
Being the sub-program 0, the values of this
screen correspond to starting conditions.
At the middle of the line, as a standard, the
days
of the week
when it will work are shown. In order to
discharge or dismiss a day, press the keys marked
with the days of the week (the “Daily” key activates
and deactivates all the days).
With the cursor at this position and pressing the
“MODE” key, we will cancel the activation by days of
the week and it will pass to work by “
frequency
” of
days. The entered value corresponds to the days it
will take between one irrigation and another. 1 would
be a daily irrigation, 2 for alternative days and 3 for an
irrigation every 3 days, etc.
The value at the right which is in brackets corre-
sponds to the days real meter: when it arrives at 0 is
when the program can work. It has to be taken into
account that this value in brackets works automati-
cally when arriving at 0 and when the days changes it
takes the value of the days it will be without irrigating.
Examples:
Frequency: 01(00) every day.
02(00) every two days, irrigating today.
02(01) every two days, irrigating tomorrow.
05(04) every 5 days, it will be 4 days
without irrigating.
