10
4. DIMENSIONS
5. INSTALLATION
5.1. EQUIPMENT PLACEMENT
Place the unit at the right position and height. Avoid direct sun exposure, humidity, dust and vibrations.
Avoid proximity to any source of interference which could affect the correct working of the unit.
In the version with "box", the equipment is provided in a hermetically sealed box (IP65) with a transparent
front cover for the keyboard/display and an opaque cover for the connection housing. The 27-output model uses a
connector attached to the left side of the box.
To maintain the isolation of the unit, it is essential to keep the panels closed, as
well as to install cable glands at the cable outlets, which are provided with the equip-
ment.
For the wall-mounting of the unit, there are two holed pieces in the upper corners.
In the “built-in” model, a hole is to be done in the frontal part of the wall or desk,
according to the measures in the section [4.] DIMENSIONS. It will be held with the
screws at the corners, using the four pieces provided with the unit.
