22
6.6. COMMUNICATION PARAMETERS
For this section, check the manual “AGRÓNIC 2500 Communications Supplement”.
6.7. VARIOUS PARAMETERS
The LCD screen can shut off automatically in order to reduce power
consumption; the screen will shut off without showing information after
five minutes have elapsed since the last time the keyboard was pressed. It
activates automatically by pressing any key.
The screen can be illuminated for easy reading in low-light situa-
tions; just respond yes to the question to have the screen normally illumi-
nated. When the screen automatically shuts off, the light will also switch
off. It is possible to manually turn the illumination on or off by pressing the
“0” key when we are in the Consultation menu on in any of the Function
screen.
In contrast we can adjust the contrast the text makes on the back-
ground; the scale runs from 0, the lightest, to 10, the darkest.
The keyboard functions by detecting fingertips pressed on the key outlines. As there are no mechanical parts,
the sensitivity may be adjusted, which determines the contact area that will interpret a pressed key; a value of 1 is
for less sensitive detection and 5 for the most sensitive.
At the same time when a key is pressed, the equipment emits a “beep”, whose sound level we may adjust;
the lowest being a “1” and the loudest a “5”; use “0” for no sound.
After entering a number in the PIN code, the theft protection is activated. If Agrónic is above 10' without pow-
er supply, it will require the PIN code to be fed again. If the wrong activation code is entered three times, the
Agrónic gets blocked, asking for the deactivation code (PUK). You will need to contact the PROGRÉS in order to
obtain the deactivation code. If you do not want to use this protection, leave the PIN code to 0.
If you want to change the PIN code, you must first enter the current PIN, otherwise you will not be able to
change it.
6.8. INSTALLER PARAMETERS
This configuration is done by the installer when activating the Agrónic
2500 and can only be modified by the installer for extensions or modifica-
tions made to the equipment or facility.
1. Erasure, allows the memory be entirely erased, and also records,
programs and sectors to be erased.
2. Events, in the standard version it is not possible to make modifica-
tions.
3. Access codes, enables the limited access to the Parameters,
Functions or Total Erasure sections, entering here the 4-digit code re-
questing access. Leave the value at 0 if this is not necessary.
4. Option activation, used to activate or deactivate options once they
have
been
installed
on
the equipment.
In
order
to
activate
them,
enter
the
code
provided
by
PROGRÉS,
and to de-
activate them enter an erroneous code. The activated option will display a “*” to the right of the text for the option.
5. Various.
Limit on sectors, from 1 to 8. With this simultaneous irrigation will be limited to the number of sectors
entered here. In practice, if more sectors are entered, these will be postponed until those being irrigat-
ed have finished. It only affects the sectors connected to the outputs of the base.
Limit on sectors in program, from 1 to 4. Each irrigation program can activate up to 4 sectors at the
same time in the same irrigation conditions. Enter here the appropriate value according to the pro-
gramming requirements.
Alternating sequences, for sequential irrigations made in one group of sectors. When one sector has
finished, the next automatically begins, and if desired, the order can be alternated to avoid having sec-
tors always being irrigated at the same time, to which the question must be answered affirmatively.
Sequential with 99:00? If this parameter is set to YES it means that a program is sequential from an-
other program and this is done by indicating 99 at the starting time field. Example: in order to indicate
that the current program is sequential from program 2, it must be set 99:02.
Ask for the time in irrigations per volume, used from programs carrying out irrigation by volume and it
is necessary to have an irrigation time limit for safety reasons.
VARIOUS PARAMETERS
Screen:
Automatic shut off: yes
Illumination: yes
Contrast: 5
Keyboard:
Sensitivity: 3
Sound level: 2
PIN security
PIN code: 0000
INSTALLER PARAM.
1. Erasure
2. Events
3. Access codes
4. Act. of options
5. Various
6. Communications
7. Language
8. Updating software
9. Backup param.
