TECNO R-evolution Instruction manual
30
21/01/16 Rev:3.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
11 USE OF THE VACUUM CLEANER
When the
R-EVOLUTION
vacuum cleaner is connected to the power supply, it can be started every time a
fl
exible hose is plugged into any of the suction sockets in the different rooms.
The vacuum cleaning is started thanks to an electrical contact assembled directly in the socket which, once
activated, allows the start of the suction motor of the vacuum cleaning unit.
The speci
fi
cally-designed electronics applied to
Tecno R-EVOLUTION
vacuum cleaners is based on a so-
phisticated software designed exclusively for Sistem Air, which alerts the operator, by means of a dedicated
messaging package, when routine maintenance should be carried out.
Such maintenance involves the dust bin to be emptied (con
fi
guration 1) or the micro
fi
ber bag to be replaced
(con
fi
guration 2) and the
fi
lter cartridge to be regularly cleaned.
11.1 Switching on the vacuum cleaner
11.2 Using the vacuum cleaner
Press the switch-on button. A warning
light will appear to indicate that the ap-
pliance is connected to the power supply.
Fix the cleaning accessory most suitable for the
desired task, to the grip handle of the
fl
exible
hose. Select the accessories according to the
area to be cleaned, the type of dirt, etc.
1
1
Insert the other end of the
fl
exible hose in the
suction socket on the wall. This will switch on
the system suction motors thanks to an elec-
tric signal in the suction socket.
Once you have
fi
nished cleaning, remove the
fl
exible hose from the suction socket by gently
accompanying the closing
fl
ap until it reaches its housing. If the
fl
ap is left to close by itself, it
will violently hit the suction socket because the suction system is still working and the vacuum
will pull the
fl
ap powerfully against the suction frame.
The vacuum cleaner is programmed to take a few seconds before switching off to ensure that
the suction action has been completed throughout the pipe network.
2
