Siruba BH9820, Руководство по эксплуатации

Страница: 45 / 95

37
5.2
Hint List
No. Name
Content
M-001
System parameter error
M-002 Panel data storage error
M-003
Panel and main board communication
M-004
Create data failed
Memory full
M-005 Create data error
Computing error
M-006
Data transmission error
M-007
Machine head parameter error
M-008 Counter error
M-009 Counter exhausted
Please
reset
M-010
Wrong machine type
M-011 Wrong manufacturer
M-012 Parameter input/output failure
5.3 Malfunction Settlement
Malfunction Reason Solutions
Thread-
breakage
Thread-tension is so high. Adjust the thread-tension to
proper
The needle is not properly installed. Install the needle in the right
direction
Compared to needle, the thread is
so
Select the thread fitting to the needle
The needle doesn’t match to the
bend
needle.
Adjust the pitch between the
needle
land bend needle, as well as
the height of needle rod, bend
There is damage or rags on
needle,
bend needle, yarn divider,
Polish or replace the rough parts.
Threading method is wrong. Thread correctly.
Needle-jumping
The upper thread tension is too
large
Adjust the upper thread tension to
a
The needle tip is broken or crooked. Replace for a new needle
The interval between needle and
bend
needle tip is incorrect.
Adjust the interval between
the
needle and the bend needle tip
The needle, bend needle and
yarn
Adjust the relationship among
these
The needle and needle stand are
not
Properly adjust the needle stand.
The bend needle tip is blunt. Polish it or replace it.
The needle is not properly installed. Install the needle in right direction.
The needle is too thin. Select needles fit for the
sewing
Needle-
breakage
The needle is crooked Replace a new needle
The needle, bend needle and
yarn
Adjust the relationship among
these
The needle and needle stand are Properly adjust the needle stand.