Siruba BH9820, Руководство по эксплуатации

Страница: 35 / 95

27
4.4 Parameter Setting
In the setting mode, press or to
select
“parameter setting” and press to enter
the interface for setting U level parameters (as
shown in right picture).
Press to quit the setting interface.
Press or to select the
parameter for changing; then press or
to change
the value of the parameter and press
to confirm the change. Pressing or
is to change the parameter and at that time
the ground color of the parameter value will turn
white; after user presses to confirm
the change, the ground color will turn black.
Parameter under Setting
Parameter after Confirmation
List of U Level Parameters:
No. Functions Description Range Changing
Step
Default
Setting
U001
1
Pedal/2 Pedals
Switch
0: Analog single
pedal
1:
Step the start pedal to
lower the presser, and the
sewing machine starts.
2:
Press the presser switch
to
lower the presser. Then step
0~2 1 2
U051
Delay time
before cut for 1
Pedal model
For automatic sewing
in
Cut-before-Sewing mode, this
parameter will determine the
0~800 50ms 0