Siruba BH9820, Руководство по эксплуатации

Страница: 19 / 95

11
Parameter
Number
Content Range Unit
Default
Value
Hole
S36
Coincident Stitch Number of
Radial Hole
1~5 Stitches
（
Within 45°
）
1 2
S37 Bar-tacking Pitch 0~30 1 0
S38 Reserved (For future use)
S39 Pattern Copy OFF~P01~P20 1 OFF
S40
Type of Bar-tacking
1: No Bar-tacking
2: Taper Bar-tacking
3: Linear Bar-tacking
4: Round Bar-tacking
1 2
S41 Double tacking availability OFF/ON
S42 Eyelet size adjustment -0.5~0.8 0.1 0
S45 Pattern generation mode 0~1 1 1
2.4 Confirm Pattern under Test Feed Mode
In the Test Feed Mode,
only cloth-feeding board works
normally when the main shaft keeps
still. This mode is used to confirm the
positional relation between needle and
presser.
⑨
Press Test Key
Press to display the stitch
form (1), pattern number (2), total stitch
number (3) and leftover stitch number
(4) in the pattern data display area.
⑩
Select the Pattern Number
The pattern number will change in
the following sequence: P01
→
P02
→
…P20
→
C1
→
C2…C9…P01 at each
pressing of (press to
reverse this sequence).
⑪
Step Presser
Pedal
Step the left pedal (5) to lower the
presse
r
⑫ Step the Start Pedal
Step the right pedal (6) to make the
cloth-feeding board move to the
position of sewing start.