Err 7
Over Torque
1. Turn off the power.
2. Check the power connection to motor.
3. Check if there is a jam to the machine, mechanical interference,
or if the textile is too thick.
4. Check the trimmer condition, replace a new trimmer if needed.
5. Reboot the system. If the error code still exists, please contact us
or authorized agents.
Err 8
Operation Box
Communication Error
1. Turn off the power.
2. Check if the power/cable connection to the operation box. Re-
connect or replace if needed.
3. Reboot the system. If the error code still exists, please contact us
or authorized agents.
Err 17
emergency stop
1. Turn off the power.
2. Check if the power/cable connection to the START switch box.
Re-connect or replace if needed.
3. Reboot the system. If the error code still exists, please contact us
or authorized agents.
Err 20
Control Box Over Heat
1. Turn off the power. Wait for at least 10 minutes until the control
box cools down.
2. Reboot the system. If the error code still exists, please contact us
or authorized agents.
Err 21
Motor Encoder Abnormal
1. Turn off the power.
2. Check if the power/cable connection to the motor encoder. . Re-
connect or replace if there is a bad connection or failure.
3. Reboot the system. If the error code still exists, please contact us
or authorized agents.
Err 24
Solenoid Valve Abnormal
1. Turn off the power.
2. Check the connection to the solenoid valve. Re-connect or
replace if needed.
3. Reboot the system. If the error code still exists, please contact us
or authorized agents.
Err 60
Speed controller
Abnormal
1. Turn off the power.
2. Check the power/cable connection to the speed controller. Re-
connect or replace if needed.
。
3. Reboot the system. If the error code still exists, please contact us
or authorized agents.
Safety Switch Error
Under Trial mode, if the motor stops rotation:
1.Turn off the power and check the connection to safety switch. Re-
connect or replace if needed.
2. Reboot the system. If the error code still exists, please contact us
or authorized agents.
P14
Содержание ASK-ASM100
