Siruba ASK-ASM100, Инструкция / Перечень запасных частей

Страница: 23 / 60

TROUBLE SHOOTING
Issue Cause Solution Reference
Deformation
：
Poor elasticity
Rippled cuff
Stretching system over-
stretches.
Not enough stretching
distance
Adjust the stretching
system
Stretching System
Poor stitching line Angle error on Pulling Roller.
Adjust the Roller angle
and contact area with
fabric.
Cross Seam System
：
Pulling Roller
Fabric accumulation
：
Fabric overlapping
Bad fabric feeding
Aligning roller over-presses,
causing fabric jam
Poor contact of Feeding Roller
against the fabric
Adjust the Roller angle
and contact area with
fabric.
Aligning System
Abnormal sewing
：
Sewing stops
before operation
completes.
Sewing cannot stop
Cross-seam Sensor is too low,
any tiny ridge may taken as
operation completes.
Cross-seam sensor is too
high, cannot detect cross-
seam to end the operation.
Adjust the sensor of
cross-seam system. Cross-Seam System
：
Cross-Seam Sensor
Bad Cutting
Not enough reserved stitch
after ejection
Not enough stitch after
suction/cut
Reset the parameter
#14
、
#18
Parameter List
：
Item #14
、
#18
Error Code Cause Solution
Err 1 Over Current
1. Turn off the power.
2. Check if the IGBT module is normal.
3. Reboot the system after 1 min.
4. If the error code still exits, please exchange control box and
contact Kaulin or authorized agents.
Err 4 Over Voltage
1. Turn off the power.
2. Check the power connection to the control box. Check if the
power supply complied to specification.
3. If the voltage is too high, please wait until the power is normal
and then reboot. If not, reboot the system after 1 minute.
4. If the error code still exits, please exchange control box and
contact Kaulin or authorized agents.
Mechanic or finished quality issue
Electronic Issues
P13