Siruba ASK-ASM100, Инструкция / Перечень запасных частей

Страница: 20 / 60

56 HL
Speed limit of sewing
machine head
200~5500 3000 rpm
Speed limit ( first priority). After configure
“
56.HL
＂
as 5500rpm, and the parameter
“
01.H
＂
can be
configured as the highest speed.
57 ACR
Motor speed of
assistant trimming
200-5000 3000 rpm
Under VTE/CTE mode, after the sewing completes,
press Manual Trimming to activate
“
trimming and
assistant suction
＂
58 ACS
Rotary stitches of
assistant trimming
1-99 20 Stitch
59 CS Pedal sensitivity 1-10 2 level
IN OT/A mode, set 〝 #59.CS 〞 to decide
the depth of pedaling as to initiate the motor.
The bigger the setting, the deeper you need to pedal.
60 NUF
Needle auto-rising
after power on
ON/OFF ON //
ON: Enable the needle to rise automatically to the
highest position after power on. OFF: Disable
61 LSH
Safety switch of side
plate
ON/OFF OFF // ON: Enable OFF: Disable
62 HVR
Highest voltage record
display
// // //
“
62HVR
＂
and
“
63LVR
＂
can record the highest
and the lowest current effective value of the control
box AC. 63 LVR
Lowest voltage record
display
// // //
64 PV
Present voltage record
display
//
Realtime
display
//
65 AOT
Time setting of auto
running test
1~500 240 hr Set time of auto running test
66 AO1 Auto running start time 1~20 2 s Set time to start the auto running
67 AO2 Auto running stop time 1~20 2 s Set time to stop the auto running
68 AOS Auto Running ON/OFF OFF //
ON: Enable the auto running test
OFF: Disable the auto running (Resume to OFF after
power off.)
69 UTT
Time display of auto
running
1~1000
Instantaneous
display
hr Accumulate running time
70 VER Software version
The display controller firmware version is SXEX.
If press key then display UI firmware version
71 GHT
Functional automatic
operation
ON/OFF OFF
ON
OFF
* Parameters unable to make changes while the
motor is working.
78 PS Password // OFF //
When Password Lock is ON, all parameters cannot be
changed. The unlock password: 0168
Note: To go to the parameter setting, press S and
input the password, hold S till the monitor shows.
79 FED
The front sensor
rotation lock without
fabric
ON/OFF OFF //
Under the OT/A mode, motor stops when the front
sensor detects no fabric.
80 BKL LCD Backlight 0%~100% 40% //
81 LAN Language // English // English / Traditional Chinese / Simplified Chinese
82 FOO
Speed controller
´
s
voltage display
0~4096
Instantaneous
display
//
83 UEG
start / stop complex
switch
ON/OFF ON
OFF: Only starting function.
ON: Start and stop function.
91 LDL Motor speed slope
165
、
200
、
250
、
300
、
350
200 ms
Motor Acceleration / deceleration slope
165ms, 200ms, 250ms, 300ms, 350ms
P10