Sirona inEos Blue, Руководство по эксплуатации, Страница: 41 / 52

63 33 632 D3446
D3446
.
201.02.03
.
23 07.2011 41
Sirona Dental Systems GmbH 11 Performing 3D acquisition
Operating Instructions Sirona Dental CAD/CAM System
3. Select the type of restoration
"Bridge", the allocation "Bite material
scan" or "Buccal scan", the Design technique and the teeth
concerned and confirm with the
"OK" button.
ª
A new restoration opens.
Acquiring an overview
1. Click the
"Preparation" button.
ª
The
"Acquisition technique" window opens.
2. Select the button for free scans in the
"Acquisition technique"
window.
ª
A section of the model appears in the the live image.
3. Place the model so that the desired section appears in the live image.
Start at the distal end. Be careful to include the adjacent teeth in the
scan.
4. Focus the image with the rotary knobs for height adjustment; see
Focusing the image [ → 33].
5. Single-click the Start button of the inEos Blue to start the automatic
scan.
ª
The first scan is taken and the crosshairs are displayed blue. If
you shift the model or re-focus it, additional scans will
automatically be generated.
6. Shift the model and take further exposures until you have a complete
overview of the required teeth. Refocus the image if necessary.
Tip: The image must overlap approximately one half of the previous
image.
Interrupt the automatic scan to continue at another location of the
model. This location must overlap roughly one half of the image
previously scanned.