Sirona inEos Blue, Руководство по эксплуатации, Страница: 43 / 52

63 33 632 D3446
D3446
.
201.02.03
.
23 07.2011 43
Sirona Dental Systems GmbH 11 Performing 3D acquisition
Operating Instructions Sirona Dental CAD/CAM System
Preparing the model for rotational scans
1. Fixate the model of the respective tooth in the center of the model pot
with filler material.
2. Set the rotation mouse to 60° and place it on the shifting plate of the
inEos Blue.
Acquisition of rotational scans
1. Select the button for rotational scans in the
"Acquisition technique"
window.
2. Focus the image with the rotary knobs for height adjustment; see
Focusing the image [ → 33].
3. Single-click the Start button of the inEos Blue to start the scan.
ª
Eight scans are acquired and included in the preparation.
4. Check whether the preparation surface and the preparation margin
were fully acquired. The other scans are displayed transparently.
5. If necessary, acquire further rotational scans at a different angle.
11.6.1.3 Acquiring an antagonist
Acquiring an antagonist
1. Replace the model in the model holder with the model of the
antagonist as described in the section "Preparing the model."
2. Click the
"Antagonist" button.
3. Select the button for free scans in the "Acquisition technique"
window.
ª
A section of the model appears in the the live image.
4. Position the model. Acquire an image of the antagonist section that
matches the exposures in the
"Preparation"image field.
5. Focus the image with the rotary knobs for height adjustment; see
Focusing the image [ → 33].
6. Single-click the Start button of the inEos Blue to start the automatic
scan.
ª
The first scan is taken and the crosshairs are displayed blue. If
you shift the model or re-focus it, additional scans will
automatically be generated.
7. Shift the model and take further exposures until you have a complete
overview of the required teeth. Refocus the image if necessary.
Tip: The image must overlap approximately one half of the previous
image.