Siqura MSD622, Руководство по установке, Страница: 29 / 40

Page 25
C h a p t e r 6
6 System Integration
The MSD622 dome camera can be integrated into other suppliers' surveillance systems in two
ways:

Via the Open Streaming Architecture (OSA) application programming interface (API). For
more information see the
Siqura PTZ Camera Codec Programming Interface - Interface
Specification or contact your supplier for details.

Via serial tunneling using the Pelco D protocol. For Pelco D, set both the UART gap timeout
and the UART max latency to 7. This ensures efficient and accurate transmission of the
commands. Other serial servers will likely use different terms for these settings. The
MSD622's default baud rate is set to 9600. Ensure that your control keyboard uses a
compatible baud rate. The factory set ID number is 1 and you must not change this setting.
For applications that require a unique RS-485 ID, please contact Siqura for assistance.
Note:
Ensure that the configuration is correct when using a serial server device, such as an
Siqura S-44 D data port, to send PTZ commands via a network.