Siqura MSD622, Руководство по установке, Страница: 22 / 40

Siqura MSD622
Page 18
Fastening the indoor tube adaptor's lock screw plate to the MSD622
8. Adjust the waterproof boot to the junction of the straight tube and the indoor tube adaptor.
9. Connect the cables to the dome camera. Then attach the dome to the tube adaptor and
fasten them together with the supplied screw.
5.4 Wall Mount
There are three types of wall mounts for the MSD622 dome camera.

Mounting with a mini wall mount, as shown in the section Mini wall mount.

Mounting with a gooseneck tube, as shown in the section Wall mounting with gooseneck
tube.

Mounting with a wall box, as shown in the section Wall box mounting.
5.4.1 Mini wall mount
Items Needed

Dome camera

Mini wall mount and other equipped items (optional accessory)

Screws and screw anchors (not supplied)

Indoor tube adaptor for the MSD622 (optional accessory)

Waterproof boot (supplied with the indoor tube adaptor)
Tools Needed

Drill

Screwdriver

To mount the dome with the mini wall mount
1. Make a cable entry hole in the wall to recess the cables.
2. Thread the cables through the mini wall mount and fix the wall mount on the wall with
proper screws and screw anchors.
3. Attach the waterproof boot to the mini wall mount.
4. Thread the cables through the indoor tube adaptor and lock it to the mini wall mount with
the supplied screws and washers.
5. At this point, the dome can be suspended from the mini wall mount using the safety wire.
Note:
After threading the cables, block the cable entry hole with the supplied sponge(s) to
prevent insects from entering the tube.
6. Attach the lock screw plate to the dome plate with the supplied screw, as depicted in the
section, Ceiling mounting with a straight tube.
7. Adjust the waterproof boot to the junction of the mini wall mount and the indoor tube
adaptor.
8. Connect the cables to the dome camera. Then attach the dome to the indoor tube adaptor
and fasten them together with the supplied screw.