26
System Settings
•
Send message to FTP when motion detected
The message will be sent to the FTP site when the alarm is triggered. An
administrator must configure the FTP site prior to enabling it in the motion
detections settings.
Motion detection alarms will not trigger if the Motion detection function is disabled or while
the Motion Detection settings are saving. In these cases, a window displays in the viewport
of the Motion Detection webpage, as shown in figure 5.13.
Figure 5.12a The configured motion
detection level.
Figure 5.12b Peaks rising above the set
motion detection level will trigger an
alarm and possibly actions as well.
Figure 5.13 Motion detection alarms
will not trigger if the web interface
displays this window.
