Sinoboom GTJZ1412, Руководство по эксплуатации

Страница: 7 / 23

Do not change the limit switch.
Do not push any object
outside the platform.
Maximum allowable
Yawing force is
indoor 400N
outdoor 200N
Do not change and prohibit the usage of any machine
parts that may affect safety and stability.
Do not replace the key parts that affect machine
stability with different weights or specifications.
Do not change or modify the aerial work platform
without the prior written permission of the
manufacturer. If an additional device is installed on
the platform or guardrail for placing tools or other
materials, this will increase the platform weight and
surface area or increase the load.
Do not place or attach any suspended load on any part
of the machine.
Do not put ladders or scaffolding within the platform
or any part near the machine.
Do not use the machine on any mobile or movable
surface or vehicle. Ensure that all the tires are in good
conditions and the slotted nuts have been tightened
and the cotter pins are complete.
Do not use the storage battery with weight lighter than
that of the original one. The storage battery not only
provides power but also serves as balance weight,
which is vital to the machine stability. The weight of
each storage battery must reach 33kg.
Do not use the machine as a crane.
Do not push the machine or other objects with the
platform.
Do not let the platform touch the adjacent object.
Do not bind the platform on the adjacent object.
Do not put the load outside the platform.
Do not operate the machine when the left and right
side doors are opened.
Do not lower the platform with the platform controller
when the platform gets caught or stuck, or is
obstructed by other objects to move normally. Operate
only after all personnel leave the platform if intending
to lower the platform with the ground controller.
Hazard of Falling
The personnel on the platform
must wear seat belts or use
safety facilities that comply
with government regulations.
Tie the lanyard to the fixed
point of the platform.
Limited
to 1 person to wear sling on
each fixed point.
Do not sit, stand or crawl on the platform guard
railing. Stand on the platform floor stably at all times.
Do not climb down from the platform when it is
raised.
Keep the platform floor free from obstacles.
Do not enter or exit the platform unless the machine is
in the fully retracted position.
Close the entrance door before operating.
Do not operate the machine if the handrails have not
been installed properly and the entrance door has not
been closed.
Hazard of Collision
Pay attention to the range
of sight and the existence
of blind spots when the
machine is started or
operated.
6
GTJZ1412 & GTJZ1414
Operation Manual