Sinoboom GTJZ1412, Руководство по эксплуатации

Страница: 6 / 23

50kV-200 kV 4.60 m
200kV-350 kV 6.10 m
350 kV-500 kV 7.62 m
500 kV-750 kV 10.67 m
750 kV-1000 kV 13.72 m
Be wary of strong winds or gusts in view of platform
movement, electric wire wiggling or drooping. Do not
operate the machine when there is lightning or heavy
rain.
Stay away from the machine if the machine comes
into contact with a live wire. The person on the
ground or platform must not touch or operate the
machine before the power is cut off.
Do not use the machine as ground electrode during
welding operation.
Hazard of Tip-over
The personnel, equipment and materials on the
platform should not exceed the maximum carrying
capacity of the platform.
GTJZ1412 Maximum bearing capacity of platform
Retraction of platform
227kg
Extension of platform - only
limited to platform
107kg
Extension of platform - only
limited to extension part
120kg
Only when the machine is in a firm and flat ground
can the platform be raised or extended.
Do not use the tilt alarm as a horizontal indicator. The
tilt alarm on the platform will ring only when the
machine is heavily tilted.
If the tilt alarm rings:
Lower the platform and transfer the machine to a solid
and horizontal ground surface.
It is necessary to lower the platform very carefully if
the tilt alarm rings when rising up the platform. It is
prohibited to change the horizontal or limit switch.
Running speed should not exceed 0.8km/h when the
platform rises.
The machine cannot travel on uneven terrain, unstable
surface or other dangerous conditions when the
platform rises.
Do not operate the machine during strong winds or
gusts. Do not increase the surface area of platform or
load. Increasing the area exposed to wind will reduce
the machine stability.
When the machine retracts, be careful and slow down
when the machine is moving on uneven terrain, with
crushed stone, unstable or smooth surface, near cave
mouth and steep slope.
Do not drive the machine on the slope where
resistance exceeds the maximum climbing capacity of
the machine by more than 25% (14°).
5
GTJZ1412 & GTJZ1414
Operation Manual