Sinoboom GTJZ0612, Руководство по эксплуатации

Страница: 39 / 92

GTJZ0612&0812&1012&1212 Operation Manual 6-1 © Jul 2020
6
PRE-OPERATION FUNCTION TEST
UNSAFE OPERATION HAZARD
Be sure to follow the instructions and
safety rules in this manual. Failure to
follow the instructions and safety
rules in this manual may result in
death or serious injury.
Do not operate this machine unless
you have learned and practiced the
rules for safely operating the ma-
chine as stated in this manual.
• Know and understand the safety
rules before continuing the next
step.
• Avoid dangerous situations.
• Always check the machine before
operating.
• Select appropriate machinery and
personal protective equipment
(hard hats, safety belt and gloves,
etc.) for the task.
• Always perform a pre-operation
inspection.
• Always perform a pre-operation
function test before using the
machine.
• Check the work site.
• Check the safety decals/ name-
plate on the machine.
• Only use the machine according
to the instructions in this manual
and for its intended purpose.
Conducting a pre-operation function test helps you dis-
cover potential problems before you start using the ma-
chine. The operator must test all machine functions
according to the instructions in this manual.
Do not use a machine with problems or malfunctions.
Mark the machine and do not use it if you discover any
problems. Only qualified maintenance technicians can
repair the machine according to the manufacturer’s
regulations.
After any maintenance, the operator must perform an-
other pre-operation inspection before conducting a pre-
operation function test.
PREPARING FOR A PRE-
OPERATION FUNCTION
TEST
Before beginning a pre-operation function test:
1. Select a test area that has a solid, flat, level
surface.
2. Ensure the test area is free of obstacles.
3. Connect the battery to the machine if it is not al-
ready connected.
TESTING THE GROUND
CONTROLLER
NOTICE
Test the ground controller in one cycle.
Figure 6-1
1
2
3
4
5
6 7
8
9
10
11
12
13
14
15