Sinoboom GTJZ0612, Руководство по эксплуатации

Страница: 23 / 92

GTJZ0612&0812&1012&1212 Operation Manual 3-1 © Jul 2020
3
SAFETY
Read, understand and comply with the safety rules and
regulations of your workplace and your government.
Before using the machine, obtain proper training on
safe machine operation and make sure you can safely
control and operate the machine.
Understand that as the operator you have the responsi-
bility and right to shut down the machine in case of fail-
ure with the machine or other emergency at your
workplace.
NOTICE
People suffering from heart disease, hypertension,
epilepsy and other diseases and people who fear
heights must never operate or use this machine. Al-
so, people who have alcohol or drugs in their system,
or experience excessive fatigue or depression, are
prohibited from operating or using this machine.
SAFETY DEFINITIONS
This safety alert symbol appears with
most safety statements. It means atten-
tion, become alert, your safety is in-
volved! Please read and abide by the
message that follows the safety alert
symbol.
Indicates a hazardous situation that, if not
avoided,
will result in death or serious injury.
Indicates a hazardous situation that, if not
avoided,
could result in death or serious injury.
Indicates a hazardous situation that, if not
avoided,
could result in minor or moderate injury.
NOTICE
Indicates a situation that can cause damage to the
engine, personal property and/or the environment, or
cause the equipment to operate improperly.
NOTE: Indicates a procedure, practice or condition that
should be followed in order for the engine or component
to function in the manner intended.
REPORTING ACCIDENTS
In case of any accident involving the machinery of , noti-
fy Immediately, even if no personal injury or property
damage occurs during the accident. Contact by tele-
phone and provide all necessary details. Failure to noti-
fy the manufacturer within 48 hours of the incident
involving the machinery of may void the product's
warranty.
NOTICE
Thoroughly inspect the machine and all its functions
after any accident, being sure to test first from the
ground controller and then from the platform control-
ler. Ensure the machine's lifting height does not ex-
ceed 3 m(9.8 ft) until all damage has been repaired
and all controllers operate properly.
ELECTROCUTION
HAZARDS
NOTE: This machine is not insulated and does not have
an electric shock protection function.
All operators and managers shall comply with national
or local regulations regarding the minimum safe dis-
tance of live conductors above the ground. In the ab-
sence of such requirements, operators and managers
should follow the minimum safety distance require-
ments in
Table 3-1 , page 3-2 .